i-m-g-1902-product-1793571751

7 Bathtub Resurfacing Alternatives for Small Bathrooms

Bathtub resurfacing isn't your only option in a small bathroom. Compare liners, replacement, and shower conversions to find the best fit for your space.

Last Updated: November 1, 2026

Quick Summary

For small bathrooms, professional bathtub resurfacing is the least disruptive alternative, restoring a sound tub’s finish in about a day while keeping the existing footprint intact. Liners, replacement, tub-to-shower conversion, and tile refinishing are the other options, each trading off differently on downtime, lifespan, and space.

  • A bathtub liner is a custom-fit acrylic shell installed over the existing tub, not the same as resurfacing.
  • Professional bathtub refinishing typically takes about a day, including cleaning, chip repair, and coating.
  • A tub-to-shower conversion frees floor space but removes the only tub, so skip it when renovating to sell.
  • In small bathrooms, keeping the existing tub footprint almost always costs less and disrupts less than changing it.
  • Century BathTubs uses its EP-ACRYLIC coating system backed by a three-year hassle-free guarantee.

Table of Contents

Comparing Bathtub Resurfacing Alternatives for Small Bathrooms

Bathtub resurfacing is a process that restores a worn tub’s surface by cleaning, repairing chips, and applying a new protective coating instead of tearing the fixture out. For small bathrooms, it is often the least disruptive path to a fresh-looking tub. At Century BathTubs, the same question comes up in almost every inquiry: is resurfacing actually the right call, or is something else better for a tight space?

Below, we compare five realistic options for a small bathroom. Each one trades off differently on disruption, cure time, lifespan, and how well it fits a cramped footprint. None of them is universally right.

I M G 1903
OptionDisruptionCure/DowntimeRelative LifespanSmall-Bathroom Fit
Professional resurfacingLowAbout a dayLong with careExcellent, keeps existing tub
Full replacementHighDays to weeksLongestPoor if the tub must be removed
Bathtub linerLow to mediumSame dayModerateGood, but adds a layer
Tub-to-shower conversionHighWeeksLongExcellent, frees floor space
Tile refinishingLowAbout a dayLong with careGood, refreshes surrounds

Bathtub Replacement for Small Bathrooms

Replacement is the right answer when the tub itself is structurally failing, not just cosmetically worn. A new tub gives you a clean slate and the longest service life of any option here. The catch is everything around it.

In a small bathroom, removing a tub usually means going through a doorway, hallway, or stairwell that was never designed for it. Add demolition, plumbing adjustments, waterproofing, and new surround work, and the project stretches out. For a landlord or a family with one bathroom, that downtime is the real cost.

A common mistake is assuming replacement is always the “better” upgrade. For a side-by-side look, see this bathtub refinishing vs new installation comparison. When the existing tub is sound and only the finish has worn, resurfacing restores the look without the mess.

Best for: tubs with structural damage, cracks through the shell, or a planned full remodel.
Skip if: the tub is solid and you mainly want a fresher surface.

Bathtub Liner Pros and Cons

A bathtub liner is a custom-fit acrylic shell installed over the existing tub, and it is the option most often confused with resurfacing. They are not the same thing.

Pros:

  • Covers the old surface completely, so stains and minor chips disappear
  • Installed quickly, often in a single visit
  • Adds a smooth, uniform look without demolition

Cons:

  • Adds a layer inside the tub, which slightly reduces the basin in an already small space
  • Water can get behind a poorly fitted liner, and that trapped moisture causes problems
  • Liners suit the shape they were made for, so odd or oversized tubs can be awkward

The liner-versus-resurfacing decision usually comes down to condition. A liner hides everything. Resurfacing works on the existing surface and keeps the original tub dimensions intact, which matters when every centimeter counts in a small bathroom.

Bathtub to Shower Conversion Toronto

Converting a tub to a walk-in shower is the biggest change on this list, and for some small bathrooms it is also the smartest. Removing the tub frees up floor area, and a curbless or low-threshold shower makes the room feel larger and easier to use.

In Toronto’s older housing stock, conversions come with real variables: drain locations, the condition of the plumbing behind the wall, and whether the subfloor can take a new shower base. That is why a conversion is a renovation project, not a one-day job.

FREE INQUIRY →

It also removes your only tub. If the home has a second bathroom with a tub, that is fine. If it does not, think carefully before giving up the tub entirely, especially for resale.

Best for: small bathrooms where space and accessibility matter more than keeping a tub.
Skip if: this is the only tub in the home or you are renovating to sell.

If a full remodel feels like too much, our guide to alternatives to full bathroom remodeling covers budget-friendly ways to refresh the room without gutting it.

How Long Does Bathtub Refinishing Take?

Professional bathtub refinishing typically takes about a day, including cleaning, chip repair, and coating, with the tub ready for careful use once the coating cures. You can read more about the resurfacing process, timeline, and longevity. The exact timeline depends on the tub’s condition and the coating system used.

Here is how the work usually breaks down:

  1. Prep and cleaning removes soap scum, mineral buildup, and old finish so the new coating bonds properly.
  2. Chip and crack repair fills damage before coating. Deep cracks in an old cast iron tub can often be repaired, though a technician should assess them first.
  3. Masking and ventilation protect the surrounding tile, fixtures, and floor.
  4. Coating application applies the finish in controlled layers for an even surface.
  5. Cure time lets the coating harden before the tub goes back into service.

Prep work matters to the result of any refinishing job. Surface cleaning and chip repair before coating are part of the process Century BathTubs follows.

Choosing the Right Option for Your Small Bathroom

The right choice depends on three things: the tub’s condition, your timeline, and whether you need to keep a tub at all.

  • Cosmetic wear only, tub is sound: professional resurfacing is the low-disruption pick.
  • Structural damage or a full remodel planned: replacement makes more sense.
  • Need to hide heavy staining fast: a liner is an option, with the caveats above.
  • Space and accessibility are the priority: a tub-to-shower conversion wins.
  • Surrounds look tired but the tub is fine: tile refinishing refreshes the whole alcove.

One insider point: in small bathrooms, keeping the existing tub footprint almost always costs less and disrupts less than changing it. Resurfacing and tile refinishing let you refresh the look without moving plumbing or reworking the layout.

Best for: owners who want a refreshed bathroom without a full renovation.
Skip if: the tub or surrounding structure is failing and needs replacement.

Request a Free Bathtub Resurfacing Inquiry

Choosing between resurfacing and the alternatives is easier once you know what your tub actually needs. Century BathTubs provides professional bathtub and shower tile refinishing using our EP-ACRYLIC coating system backed by a three-year hassle-free guarantee. Our licensed and insured technicians handle chip repair, surface prep, and coating, so your bathroom is back in use as efficiently as possible. Get started with Century BathTubs and restore your tub’s finish without the cost and disruption of replacement. Learn more about bathtub refinishing in Toronto.


Frequently Asked Questions

Is bathtub refinishing or replacement better for a small bathroom?

For most small bathrooms, refinishing is the lower-disruption choice. A professional bathtub resurfacing job restores the existing tub in place, so you avoid demolition, plumbing changes, and the cost of a new fixture. Replacement makes sense when the tub is structurally failing, leaking, or the wrong size for the room. If the tub is sound and you mainly want a fresh, slip-resistant surface, refinishing usually gets you there faster and for less.

Can a bathtub liner be installed in a small bathroom?

Yes, liners are custom-measured to fit almost any tub, including compact models. The trade-off is that a liner adds a thin layer over the existing tub and drain, which can trap moisture underneath if the original surface is cracked or poorly prepped. In a small bathroom with limited ventilation, that trapped moisture is a real concern. Weigh the bathtub liner pros and cons carefully, and ask how the installer handles the drain and overflow.

How long does bathtub refinishing take before the tub can be used?

Exact timing depends on the coating system, the condition of the tub, and bathroom ventilation. Ask your provider for a clear timeline in writing so you can plan around a single day without the tub.

Can you refinish a bathtub and shower tiles at the same time?

Yes. Refinishing the tub and the surrounding shower tiles together is common and gives a more consistent finish than doing one and leaving the other worn. Since Century BathTubs handles both bathtub and shower tile refinishing, the surround can be coordinated together.

Share this post